Changzhou yimin drying equipment Co.ltd.
Add to Cart
FZG Series Static Square Shape indirect dryer for Solvent Recovery
Description
FZG Series Static Square Shape indirect dryer for Solvent Recovery is divided into static and dynamic drier. FZG Series Static Square Shape Vacuum Drying Equipment for Solvent Recovery belongs to static drier. When raw material is dried in static drier, raw material is in static state and its shape can not be destroyed. Before drying, it can carry out the treatment of disinfection. When raw material is dried in dynamic drier, raw material is turned over ceaselessly. So it can be dried better and more uniformly.
In the state of vacuum, the boiling point of raw material will be dropped. Therefore it is suitable for drying raw material that is unstable or thermal sensitive. The vacuum drier is very airtight. So it is also suitable for drying raw material that contains strong irritative and toxic gases and the solvent needs to recovery.
Application
FZG Series Static Square Shape indirect dryer for Solvent Recovery is suitable for drying the material which is easy to decompose/polymerization under the high temperature and the degenerative heat-sensitive materials. Before drying can take disinfects processing, to prevent intermingle materials during the drying process.
FZG Series Static Square Shape indirect dryer for Solvent Recovery belongs to static type vacuum dryer, so dry material body won't damaged, is widely used in pharmacy, food, chemical and electric industries etc.
Features
1) The boiling point of raw material will be decreased under the vacuum condition and make the evaporator increases the pushing force of heat transfer.
2) The heat source can be low pressure steam or waste heat;
3) The loss of the heat during the evaporation is only a little.
4) The disinfection treatment can be carried out before drying and there is no impurity material mixing during drying process. It is in conformity with the requirement of GMP;
5) Static vacuum dryer will not damage the shape of raw materials.
Technical Parameters
| Model | FZG-10 | FZG-15 | FZG-20 |
| Size of baking tray (mm) | 460×640×45 | 460×640×45 | 460×640×45 |
| Quantity of baking trays | 20 | 32 | 48 |
| Work pressure inside the pipe of baking support (MPa) | ≤0.784 | ≤0.784 | ≤0.784 |
| operation temperature of baking support (℃) | 35-150 | 35-150 | 35-150 |
| vacuum degree inside the chamber when operation idle(MPa) | -0.1 | -0.1 | -0.1 |
| Under -0.1Mpa and 110℃, water evaporation rate (kg/m2 ·hr) | 7.2 | 7.2 | 7.2 |
| vacuum pump with condenser pump | 2X-70A-5.5KW | 2X-70A-5.5KW | 2X-90A-7.5KW |
| vacuum pump without condenser | SZ-2-4KW | SZ-2-4KW | SZ-2-5.5KW |
| Weight of drying chamber(kg) | 1400 | 2100 | 3200 |
| Inter size of chamber(mm) | 1500×1060×1220 | 1500×1400x1220
| 1500×1800x1220
|
| Outer size of chamber(mm) | 1924×1720x1513 | 1513×1924x2060 | 1924×2500x1513
|
